We put a lot of care in making every NODO Lite unit, so we created this short guide to help you make the most out of it.

If you have any questions, please contact us!

NODO Lite - Product guide

NODO Lite is the compact version of our original NODO MagSafe holder clamp.

It allows you to dock and remove your phone from your MagSafe charger with a single hand, while freeing up space from your desk surface.

Setting up your NODO Lite

There are 3 simple steps to have a fully functional NODO Lite in your desk:

  1. Route the USB-C cable of your MagSafe charger through the opening on the clamp
  2. Place the MagSafe puck on the holder and apply some light pressure on it to fully insert the puck in position
  3. Place the clamp on a stable shelf or desk edge and tighten the screw until the clamp is secured - Do not overtighten it!

 


Useful tips

  • With your NODO Lite, you can make use of the StandBy mode on your iPhone to turn it into a calendar or clock (or many other things). Keeping your phone in a dedicated space can help you stay more focused while working or studying.

 

Cable clip

We have included a small cable clip with a pre-applied double-sided adhesive. It works well on smooth surfaces and leaves no residues. You can use it under your desk or desk shelf to tidy up your MagSafe’s cable.

Adhesive pad

The included adhesive pad can help you keep your MagSafe secured into place if you notice that the charging puck is becoming loose over time.

To use it, just peel of the protective film and install your MagSafe charger as usual. Do not remove it for a couple hours so that the microsuction pad creates a strong bond with the charger.

If you ever need to remove your charger from the holder after using the adhesive pad, you just need to carefully apply pressure from the back until it comes loose.

The adhesive pad leaves no residues in your charger or the NODO Lite unit once removed.

Things to consider

Compatibility

You should be able to insert your MagSafe charging puck by applying a light pressure on the front of it. If you need to press too hard, let us know and we'll help you check if there's any compatibility issue

Our products are designed to fit high-quality, original chargers from Apple and Google*. Because of the large amount of MagSafe-compatible chargers out there, we can only guarantee the compatibility with these models.

*Sold separately by authorized vendors.

You can also fit our Magnetic Puck to use your NODO as a stand without a charger.

Safe placement

Make sure the clamp is not installed on any location where it can be accidentally bumped or moved by you or the people around you